OE Ref.:
1K0 907 253 D
Commercial Name:
Conti Clamp-in TG1B Siemens VDO 315MHz VW
OEM Sensor P/N:
1K0 907 253 D
Ean Code:
EZ-sensor® coverage:
YES
Nut Torque:
71 in-lbs, (8 Nm) Nm
Screw Torque:
-- Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1094
20017
20017
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Black Anodized Aluminum Nut, 2 Plastic Sealing Caps (Grey and Black), 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer
Part No.:
1107
20030
20030
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Aluminum Nut, 2 Plastic Sealing Caps (Grey & Black), 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Auto Relearn
Relearn DescriptionRelearn Following Tire Rotation/Replacement
1. Inflate all tires to pressure listed on tire placard.
2. Apply parking brake and turn ignition to the ON/RUN position (engine off).
3. Hold SET (or ESP) button (located next to gear shift) until audio signal is heard. Audio signal confirms successful relearn.
**See VW-1 if procedure is unsuccessful.
** Relearn Following Sensor Replacement
1. Inflate all tires to pressure listed on tire placard.
2. Apply parking brake.
3. Vehicle needs to stand for 20 minutes in order for control module to enter learn mode.
4. Drive vehicle above 16mph to register sensor IDs.
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.