Part No.:
20315F OE
Commercial Name:
Schrader Snap-in GEN4 type 315MHz Ford
OEM Sensor P/N:
Ean Code:
EZ-sensor® coverage:
YES
Nut Torque:
-- Nm
Screw Torque:
11.5 in-lbs (1.3 Nm) Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Stationary Relearn
Relearn DescriptionWITH STANDARD IGNITION:
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to OFF position and press and release brake pedal.
3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.Place antennae of learn tool on sidewall of LF by the sensor to activate.Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated. PUSH-BUTTON START: **MUST PRESS AND HOLD START BUTTON TO ACTIVATE ACCESSORY POWER, IF YOU HAVE TO PRESS THE START BUTTON TWICE, THEN SEE NEXT PUSH-BUTTON START SUMMARY.
WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB):
1. With vehicle off, press and release the brake pedal.
2. Press and hold START button until chime sounds.
3. Power off by pushing the button 1 time.
4. Press and hold START button until chime sounds.
5. Power off by pushing the button 1 time.
6. Press and hold START button until chime sounds.
7. Press and release the brake pedal.
8. Power off by pushing the button 1 time.
9. Press and hold START button until chime sounds.
10. Power off by pushing the button 1 time.
11. Press and hold START button until chime sounds.
12. Power off by pushing the button 1 time.
13. Press and hold START button until chime sounds.
14. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
15. Place antennae of learn tool on sidewall of LF by the sensor to activate. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
16. After successfully programming the LR tire, the message center should display “TRAINING COMPLETE”. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated. PUSH-BUTTON START: **MUST PRESS START BUTTON TWICE TO ACTIVATE ACCESSORY POWER
WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB):
1. With vehicle off, press and release the brake pedal.
2. Press START button 8 times
3. Press and release the brake pedal.
4. Press START button 9 times
5. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
6. Place antennae of learn tool on sidewall of LF by the sensor to activate. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
7. After successfully programming the LR tire, the message center should display “TRAINING COMPLETE”. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated. • TIA Troubleshooting Tips: If performing ID relearn via the OBDII, sensors must be reactivated, with ignition still on, after registering sensor IDs via the OBDII in order to stop dome light from flashing.
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.