OE Ref.:
1K0 907 253 D
Commercial Name:
Conti Clamp-in TG1B Siemens VDO 315MHz VW
OEM Sensor P/N:
1K0 907 253 D
Ean Code:
EZ-sensor® coverage:
YES
Nut Torque:
71 in-lbs, (8 Nm) Nm
Screw Torque:
-- Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1094
20017
20017
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Black Anodized Aluminum Nut, 2 Plastic Sealing Caps (Grey and Black), 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer
Part No.:
1107
20030
20030
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Aluminum Nut, 2 Plastic Sealing Caps (Grey & Black), 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Stationary Relearn
Relearn Description1. Inflate all tires to pressure listed on tire placard.
2. Hold down RESET button (on end of wiper lever) until DISPLAY TYPE is displayed.
3. Press button on end of wiper lever to select SET.
4. Press RESET button.
5. Press button on end of wiper lever to select TIRE PRESSURE
6. Press RESET button.
7. Press button on end of wiper lever to select WHEEL CHANGE (select STORE PRESSURES if resetting air pressure).
8. Press RESET button. Relearn can take 20 minutes to complete. TIA troubleshooting tip: If vehicle is equipped with automatic suspension stabilizing system, then the vehicle must be place in “jack mode” to complete TPMS relearn procedure. See vehicle owner’s manual for model specific instructions.
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.