OE Ref.:
52933-2F000
Commercial Name:
TRW Clamp-in Fixed Angle ver 1 315MHz
OEM Sensor P/N:
52933-2F000
Ean Code:
EZ-sensor® coverage:
YES
Nut Torque:
35.4 in-lbs (4 Nm) Nm
Screw Torque:
-- Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1096
20019
20019
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Auto Relearn
Relearn DescriptionEnsure all tires are inflated to the pressure listed on the tire placard.
Drive vehicle above 15mph for a minimum of 20 minutes to complete relearn process, or use properly formatted scan tool.
TIA troubleshooting tip: These vehicles utilize two types of TPMS: lo-line and hi-line.
Hi-line systems show the driver positions and air pressure of all tires via a display, while lo-line systems do not communicate position and will only utilize the TPMS indicator symbol on the dash.
Some models switched systems midyear, so be aware of the type of TPMS you are servicing.
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.