OE Ref.:
36118378682
Commercial Name:
Beru-Huf Clamp-in Separate valve G1 433MHz BMW
OEM Sensor P/N:
36118378682
Ean Code:
5054208000374
EZ-sensor® coverage:
YES
Nut Torque:
35 in-lbs (4 Nm) Nm
Screw Torque:
35 in-lbs (4 Nm) Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
Compatible with all Huf Service Kits
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Auto Relearn
Relearn DescriptionIf equipped with iDrive:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select “Settings” or “Vehicle Info”.
4. Select “Vehicle”, “Vehicle/Tires” or “Vehicle Status”.
5. Select “TPM”, “Reset TPM”, or “Perform Reset”.
6. Start the engine, select “Reset”, “Yes”.
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.
If not equipped with iDrive:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and “RESET” are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until “RESETTING” or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.
If not equipped with iDrive (for some models):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials RDE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.