OE Ref.:
13581558
Commercial Name:
Schrader Snap-in Gen4 314.9MHz GM
OEM Sensor P/N:
13581558
Ean Code:
EZ-sensor® coverage:
YES
Nut Torque:
-- Nm
Screw Torque:
11.5 in-lbs (1.3 Nm) Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1095
20018
20018
Commercial Name:
EZ-sensor Service Pack - Rubber Valve Assembly
Note:
20018 replaces 20008
Contents: 1 Rubber Valve Stem assembled with Plastic sealing cap and Valve Core, 1 Stainless Steel Attachment Screw,
Part No.:
1530
34000
34000
Commercial Name:
Schrader Service Pack - Aluminum Valve
Note:
Contents: 1 Aluminum Valve Stem, 1 Aluminum Nut, 1 Rubber Grommet, 1 Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Stationary Relearn
Relearn DescriptionWITH STANDARD IGNITION
1. Set parking brake
2. Turn ignition to ON/RUN (engine off)
3. Press the MENU button located on the turn signal lever (or instrument cluster on some models) until “VEHICLE INFORMATION MENU” is displayed.
4. Once you are in the VEHICLE INFORMATION MENU, use the on the turn signal lever until the DIC displays the vehicle’s tire inflation pressures and positions.
5. Press and hold the SET/CLR button, located at end of turn signal lever button to begin sensor matching process. A message should display: “Are you sure that you want to relearn? YES or NO”. Some models may require you to press and hold the SET/CLR button until the message is displayed.
6. Use the on the turn signal lever to highlight YES. Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, “Tire Learning Active” will be displayed on the DIC, and the left front turn signal will be illuminated.
7. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor. Once the left rear sensor has been activated, the horn will chirp twice. You can then turn the vehicle off to exit “learn mode.”
WITH PUSH-BUTTON START (if unsuccessful, see GM-22)
1. Press and hold the push button start until the vehicle is in accessary mode. Note: on Cadillac models you will know when you are in accessary mode when the Cadillac emblem appears on the DIC. Engine may need to be running for DIC menu to populate.
2. Press the MENU button located on the turn signal lever until “VEHICLE INFORMATION MENU” is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the on the turn signal lever until the DIC displays the vehicle’s tire inflation pressures and positions.
4. Press and hold the button located on the end of the turn signal lever until “Are you sure that you want to relearn? YES or NO” is displayed.
5. Use the on the turn signal lever to highlight YES. Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, “Tire Learning Active” will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor. Once the left rear sensor has been activated, the horn will chirp twice. You can then turn the vehicle off to exit “learn mode.”
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.