Relearn DescriptionWITH STANDARD IGNITION:
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to OFF position and press and release brake pedal.
3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.Place antennae of learn tool on sidewall of LF by the sensor to activate.Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated. PUSH-BUTTON START: **MUST PRESS AND HOLD START BUTTON TO ACTIVATE ACCESSORY POWER, IF YOU HAVE TO PRESS THE START BUTTON TWICE, THEN SEE NEXT PUSH-BUTTON START SUMMARY.
WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB):
1. With vehicle off, press and release the brake pedal.
2. Press and hold START button until chime sounds.
3. Power off by pushing the button 1 time.
4. Press and hold START button until chime sounds.
5. Power off by pushing the button 1 time.
6. Press and hold START button until chime sounds.
7. Press and release the brake pedal.
8. Power off by pushing the button 1 time.
9. Press and hold START button until chime sounds.
10. Power off by pushing the button 1 time.
11. Press and hold START button until chime sounds.
12. Power off by pushing the button 1 time.
13. Press and hold START button until chime sounds.
14. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
15. Place antennae of learn tool on sidewall of LF by the sensor to activate. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
16. After successfully programming the LR tire, the message center should display “TRAINING COMPLETE”. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated. PUSH-BUTTON START: **MUST PRESS START BUTTON TWICE TO ACTIVATE ACCESSORY POWER
WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB):
1. With vehicle off, press and release the brake pedal.
2. Press START button 8 times
3. Press and release the brake pedal.
4. Press START button 9 times
5. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
6. Place antennae of learn tool on sidewall of LF by the sensor to activate. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
7. After successfully programming the LR tire, the message center should display “TRAINING COMPLETE”. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated. • TIA Troubleshooting Tips: If performing ID relearn via the OBDII, sensors must be reactivated, with ignition still on, after registering sensor IDs via the OBDII in order to stop dome light from flashing.