EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.Click on item for more details:
This list is being continuously updated.
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
1. Inflate all tires to pressure listed on tire placard. 2. Turn ignition to ON/RUN position. 3. If not equipped with RESET button: - Press the Trip/Odometer button until TIRE RESET or CHECK TIRE and RESET appear. - Press and hold button for 3 seconds until TPMS telltale blinks 3 times and turns off. 4. If equipped with RESET button: - Press and hold TIRE RESET BUTTON (on instrument panel, behind left side of steering wheel) for 3 seconds. TPMS telltale should blink 3 times and turn off.
20049 replaces 20047
EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.
(A)=45.4 mm; (B)=Type 3
NOTE : the transmission frequency of 315 MHz is not admissible in the EU
20018 replaces 20008
Contents: 1 Rubber Valve Stem assembled with Plastic sealing cap and Valve Core, 1 Stainless Steel Attachment Screw,
Contents: 1 Aluminum Valve Stem, 1 Aluminum Nut, 1 Rubber Grommet, 1 Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw
Contents: 1 Black Anodized Aluminum Valve Stem, 1 Black Anodized Aluminum Nut, 1 Rubber Grommet, 1 Black Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw