Click on item for more details:
This list is being continuously updated.
Content: - 1 Core - 1 Cap - 1 Stem - 1 Nut - 1 Grommet
1. Fill the tire with the required pressure.
2. Use TPMS device to read all sensors.
3 Connect TPMS unit to OBD II.
4. Switch on the ignition.
5. Follow the instructions on the screen.
6. Switch off ignition, then switch on (engine off).
7. Wait 5 minutes.
NOTE: If the TPMS warning light remains on after the ECU has been reset, it must be driven with at least 30 km / h for up to 20 min.
For more information on product and availability please contact us at Schrader-SalesEU@Sensata.com