SHOPPING CART

Ford Transit Courier
2014-04/2014-09

OEM Products

OE Ref.: 
DR3V-1A180-BB
DR3V-1A180-BB
Schrader Clamp-in Fixed 20deg angle 433MHz Ford

Schrader Clamp-in Fixed 20deg angle 433MHz Ford
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
OE Ref.: DR3V-1A180-BB
Commercial Name: Schrader Clamp-in Fixed 20deg angle 433MHz Ford
Other Number Stamped: DR3V-1A180-CB
Ean Code: 5054208001388
EZ-sensor® coverage: YES
Nut Torque Nm: 8
Screw Torque Nm: --
Valve Core Torque Nm: 0.25
Colour: Info not available
Note:  
 

Click on item for more details:

This list is being continuously updated.

Relearn Summary:Stationary Relearn
Relearn Description

For a standard ignition: 
1. Fill all four tires with the recommended pressure. 
2. Tighten the handbrake.
3. Set the ignition to the OFF position, then operate the brake pedal and release it 
4. Set the ignition to the RUN position (ON) 3 times quickly from OFF (OFF) (do not start engine). Finish the process in the RUN position. 
5. Operate and release the brake pedal. 
6. Set the ignition to the OFF position 
7. Switch the ignition to the RUN position three times quickly from the OFF- (OFF) position (do not start the engine), end the process in the RUN position. Note: All above actions must be performed within 10 seconds. 
8. A single horn sounds and the TPMS light flashes as soon as the training mode is initiated. 
9. If a message center is present, it displays RELEARN LF Tire. 
10. Use the device to activate the sensor on the front, a single horn will sound when the sensor is detected. 
11. Repeat the step for the right front, rear right and left rear tires. 
12. After learning LR, the message center displays: TRAINING MODE COMPLETTE (training mode completed). If the vehicle is not equipped with a message center display, the successful completion will be indicated by the fact that no horn is sounded after the ignition is set to the OFF position.

Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEU@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEU@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Aftermarket Sensor

Part Nr.  
3019
3019
Schrader Clamp-in Fixed 20deg angle 433MHz Ford

Schrader Clamp-in Fixed 20deg angle 433MHz Ford
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 3019
Commercial Name: Schrader Clamp-in Fixed 20deg angle 433MHz Ford
Oem Sensor Pn: DR3V-1A180-BB
Other Number Stamped: DR3V-1A180-BB
Ean Code: 5054208001388
EZ-sensor® coverage: YES
Nut Torque Nm: 8
Screw Torque Nm: --
Valve Core Torque Nm: 0.25
Colour: Info not available
Note:  
 

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEU@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEU@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Programmable Sensor

Part Nr.  
2200-GO1
2200-GO1
Schrader programmable EZ-sensor® GO 433MHz Europe

Part Nr.: 2200-GO1
Commercial Name: Schrader programmable EZ-sensor® GO 433MHz Europe
Oem Sensor Pn:
Other Number Stamped: 2200-P1
Ean Code: 5054208007427
Nut Torque Nm: 6
Screw Torque Nm: --
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:

For more information on product and availability please contact us at Schrader-SalesEU@Sensata.com

 
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5076
Commercial Name: EZ-Sensor Delta Service Kit
Schrader France Reference:
Note:
0.00 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEU@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEU@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Part Nr.  
2200T-GO1
2200T-GO1
Schrader programmable EZ-sensor® GO 433 MHz Europe Titanium

Part Nr.: 2200T-GO1
Commercial Name: Schrader programmable EZ-sensor® GO 433 MHz Europe Titanium
Oem Sensor Pn:
Other Number Stamped:
Ean Code: 5054208007403
Nut Torque Nm: 6
Screw Torque Nm:
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:

For more information on product and availability please contact us at Schrader-SalesEU@Sensata.com

 
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5076T
Commercial Name: EZ-Sensor Delta Service Kit Titanium
Schrader France Reference:
Note:
99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order

Click on item for more details: