SHOPPING CART

Ford Kuga
2014-03/2020-06

OEM Products

OE Ref.: 
EV6T-1A180-CB
EV6T-1A180-CB
Schrader Snap-in Faraday 433MHz Ford

Schrader Snap-in Faraday 433MHz Ford
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
OE Ref.: EV6T-1A180-CB
Commercial Name: Schrader Snap-in Faraday 433MHz Ford
Schrader France Reference: 66919-67
Other Number Stamped: 2036832
EZ-sensor® coverage: YES
Nut Torque Nm: --
Screw Torque Nm: 1.4
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:  
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5033-10 (Replaced - use 5033)
Commercial Name: Replaced by 5033
Schrader France Reference: 66742-68
Note:

Content of the service kit: - 1 stem - 1 screw - 1 metal bar

99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5061-10 (Replaced - use 5061)
Commercial Name: Replaced by 5061
Schrader France Reference:
Note:

Contents- 1 Screw 1 Stem 1 Nut 1 Grommet 1 Cap 1 Core

99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5061B-10 (Replaced - use 5061B)
Commercial Name: Replaced by 5061B
Schrader France Reference:
Note:
99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:Stationary Relearn
Relearn Description

For a standard ignition: 
1. Fill all four tires with the recommended pressure. 
2. Tighten the handbrake.
3. Set the ignition to the OFF position, then operate the brake pedal and release it 
4. Set the ignition to the RUN position (ON) 3 times quickly from OFF (OFF) (do not start engine). Finish the process in the RUN position. 
5. Operate and release the brake pedal. 
6. Set the ignition to the OFF position 
7. Switch the ignition to the RUN position three times quickly from the OFF- (OFF) position (do not start the engine), end the process in the RUN position. Note: All above actions must be performed within 10 seconds. 
8. A single horn sounds and the TPMS light flashes as soon as the training mode is initiated. 
9. If a message center is present, it displays RELEARN LF Tire. 
10. Use the device to activate the sensor on the front, a single horn will sound when the sensor is detected. 
11. Repeat the step for the right front, rear right and left rear tires. 
12. After learning LR, the message center displays: TRAINING MODE COMPLETTE (training mode completed). If the vehicle is not equipped with a message center display, the successful completion will be indicated by the fact that no horn is sounded after the ignition is set to the OFF position.

Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Aftermarket Sensor

Part Nr.  
3021
3021
Schrader Snap-in Faraday 433MHz Ford

Part Nr.: 3021
Commercial Name: Schrader Snap-in Faraday 433MHz Ford
Schrader France Reference: 66919-67
Oem Sensor Pn: EV6T-1A180-CC, EV6T-1565-DA; EV6T-1A180-CB; EV6T-1A180-CC; EV6T-1A180-CD; EV6T-1A180-DB; EV6T-1A180-DC; EV6T-1A180-DD
Other Number Stamped: 3021
Ean Code: 5054208001135
EZ-sensor® coverage: YES
Nut Torque Nm: --
Screw Torque Nm: 1.4
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:

Alternative sensor is 3077 (3077 is fitted with metal stem, if rubber stem is required then fit 5033 also);(A)=45.4 mm; (B)=Type 2

 
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5033-10 (Replaced - use 5033)
Commercial Name: Replaced by 5033
Schrader France Reference: 66742-68
Note:

Content of the service kit: - 1 stem - 1 screw - 1 metal bar

99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5061-10 (Replaced - use 5061)
Commercial Name: Replaced by 5061
Schrader France Reference:
Note:

Contents- 1 Screw 1 Stem 1 Nut 1 Grommet 1 Cap 1 Core

99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5061B-10 (Replaced - use 5061B)
Commercial Name: Replaced by 5061B
Schrader France Reference:
Note:
99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Alternative Sensor

Part Nr.  
3077
3077
Schrader Faraday Clamp-in Fixed 20deg angle 433MHz Ford

Part Nr.: 3077
Commercial Name: Schrader Faraday Clamp-in Fixed 20deg angle 433MHz Ford
Oem Sensor Pn: G1ET-1A180-CA, G1ET-1A180-CA; G1ET-1A180-DA
Other Number Stamped: EV6T-1A150-CB
Ean Code: 5054208003894
EZ-sensor® coverage: YES
Nut Torque Nm: 6
Screw Torque Nm: 1.4
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:

Alternative sensor is 3021 (3021 is fitted with rubber stem, if metal stem is required then fit 5061-10 also); (A)=55.5 mm; (B)=Type 2

 
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5033-10 (Replaced - use 5033)
Commercial Name: Replaced by 5033
Schrader France Reference: 66742-68
Note:

Content of the service kit: - 1 stem - 1 screw - 1 metal bar

99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5061-10 (Replaced - use 5061)
Commercial Name: Replaced by 5061
Schrader France Reference:
Note:

Contents- 1 Screw 1 Stem 1 Nut 1 Grommet 1 Cap 1 Core

99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5061B-10 (Replaced - use 5061B)
Commercial Name: Replaced by 5061B
Schrader France Reference:
Note:
99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5062-10 (Replaced - use 5062)
Commercial Name: Replaced - use 5062
Schrader France Reference:
Note:
99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Service Kits

Part Nr.  
5033-10 (Replaced - use 5033)
5033-10 (Replaced - use 5033)
Replaced by 5033

Replaced by 5033
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5033-10 (Replaced - use 5033)
Commercial Name: Replaced by 5033
Schrader France Reference: 66742-68
Note:

Content of the service kit: - 1 stem - 1 screw - 1 metal bar

 
 

Click on item for more details:

This list is being continuously updated.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Part Nr.  
5061-10 (Replaced - use 5061)
5061-10 (Replaced - use 5061)
Replaced by 5061

Replaced by 5061
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5061-10 (Replaced - use 5061)
Commercial Name: Replaced by 5061
Note:

Contents- 1 Screw 1 Stem 1 Nut 1 Grommet 1 Cap 1 Core

 
 

Click on item for more details:

This list is being continuously updated.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Part Nr.  
5061B-10 (Replaced - use 5061B)
5061B-10 (Replaced - use 5061B)
Replaced by 5061B

Replaced by 5061B
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5061B-10 (Replaced - use 5061B)
Commercial Name: Replaced by 5061B
Note:  
 

Click on item for more details:

This list is being continuously updated.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Programmable Sensor

Part Nr.  
2200-GO1
2200-GO1
Schrader programmable EZ-sensor® GO 433MHz Europe

Part Nr.: 2200-GO1
Commercial Name: Schrader programmable EZ-sensor® GO 433MHz Europe
Oem Sensor Pn:
Other Number Stamped: 2200-P1
Ean Code: 5054208007427
Nut Torque Nm: 6
Screw Torque Nm: --
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:

For more information on product and availability please contact us at Schrader-SalesEU@Sensata.com

 
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5076
Commercial Name: EZ-sensor Delta Service Kit
Schrader France Reference:
Note:
0.00 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Part Nr.  
2200T-GO1
2200T-GO1
Schrader programmable EZ-sensor® GO 433 MHz Europe Titanium

Part Nr.: 2200T-GO1
Commercial Name: Schrader programmable EZ-sensor® GO 433 MHz Europe Titanium
Oem Sensor Pn:
Other Number Stamped:
Ean Code: 5054208009438
Nut Torque Nm: 6
Screw Torque Nm:
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:

For more information on product and availability please contact us at Schrader-SalesEU@Sensata.com

 
 

Click on item for more details: