SHOPPING CART

Chevrolet Camaro Convertible
2009-08/2018-05

OEM Products

OE Ref.: 
20925925
20925925
Schrader Clamp-in Gen J 433MHz GM

Schrader Clamp-in Gen J 433MHz GM
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
OE Ref.: 20925925
Commercial Name: Schrader Clamp-in Gen J 433MHz GM
Schrader France Reference: 66543-67
Other Number Stamped: 20925925
Ean Code: 5054208000299
EZ-sensor® coverage: YES
Nut Torque Nm: 8
Screw Torque Nm: --
Valve Core Torque Nm: 0.25
Colour: BLUE
Note:  
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5030-10 (Replaced - use 5030)
Commercial Name: Replaced by 5030
Schrader France Reference: 66700-KD
Note:

Content: - 1 Core - 1 Cap - 1 Stem - 1 Nut - 1 Grommet

99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:Stationary Relearn
Relearn Description

WITH STANDARD IGNITION 
1. Set parking brake 
2. Turn ignition to ON/RUN (engine off) 
3. Press the MENU button located on the turn signal lever (or instrument cluster on some models) until “VEHICLE INFORMATION MENU” is displayed. 
4. Once you are in the VEHICLE INFORMATION MENU, use the on the turn signal lever until the DIC displays the vehicle’s tire inflation pressures and positions. 
5. Press and hold the SET/CLR button, located at end of turn signal lever button to begin sensor matching process. A message should display: “Are you sure that you want to relearn? YES or NO”. Some models may require you to press and hold the SET/CLR button until the message is displayed. 
6. Use the on the turn signal lever to highlight YES. Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, “Tire Learning Active” will be displayed on the DIC, and the left front turn signal will be illuminated. 
7. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor. Once the left rear sensor has been activated, the horn will chirp twice. You can then turn the vehicle off to exit “learn mode.” 

WITH PUSH-BUTTON START (if unsuccessful, see GM-22) 
1. Press and hold the push button start until the vehicle is in accessary mode. Note: on Cadillac models you will know when you are in accessary mode when the Cadillac emblem appears on the DIC. Engine may need to be running for DIC menu to populate. 
2. Press the MENU button located on the turn signal lever until “VEHICLE INFORMATION MENU” is displayed. 
3. Once you are in the VEHICLE INFORMATION MENU, use the on the turn signal lever until the DIC displays the vehicle’s tire inflation pressures and positions.
4. Press and hold the button located on the end of the turn signal lever until “Are you sure that you want to relearn? YES or NO” is displayed. 
5. Use the on the turn signal lever to highlight YES. Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, “Tire Learning Active” will be displayed on the DIC, and the left front turn signal will be illuminated. 
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor. Once the left rear sensor has been activated, the horn will chirp twice. You can then turn the vehicle off to exit “learn mode.”

Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Aftermarket Sensor

Part Nr.  
3054
3054
Schrader Clamp-in Gen J 433MHz GM

Part Nr.: 3054
Commercial Name: Schrader Clamp-in Gen J 433MHz GM
Schrader France Reference: 66543-67
Oem Sensor Pn: 20925925, 20925925
Other Number Stamped: 3054
Ean Code: 5054208000299
EZ-sensor® coverage: YES
Nut Torque Nm: 8
Screw Torque Nm: --
Valve Core Torque Nm: 0.25
Colour: BLUE
Note:  
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5030-10 (Replaced - use 5030)
Commercial Name: Replaced by 5030
Schrader France Reference: 66700-KD
Note:

Content: - 1 Core - 1 Cap - 1 Stem - 1 Nut - 1 Grommet

99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Service Kits

Part Nr.  
5030-10 (Replaced - use 5030)
5030-10 (Replaced - use 5030)
Replaced by 5030

Replaced by 5030
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order
Part Nr.: 5030-10 (Replaced - use 5030)
Commercial Name: Replaced by 5030
Schrader France Reference: 66700-KD
Note:

Content: - 1 Core - 1 Cap - 1 Stem - 1 Nut - 1 Grommet

 
 

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Programmable Sensor

Part Nr.  
2200-GO1
2200-GO1
Schrader programmable EZ-sensor® GO 433MHz Europe

Part Nr.: 2200-GO1
Commercial Name: Schrader programmable EZ-sensor® GO 433MHz Europe
Oem Sensor Pn:
Other Number Stamped: 2200-P1
Ean Code: 5054208007427
Nut Torque Nm: 6
Screw Torque Nm: --
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:

For more information on product and availability please contact us at Schrader-SalesEU@Sensata.com

 
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5076
Commercial Name: EZ-sensor Delta Service Kit
Schrader France Reference:
Note:
0.00 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order

Click on item for more details:

This list is being continuously updated.

Relearn Summary:
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at Note:
Sensor images shown in this document are for illustration purpose only!
Physical sensor body may be different.
Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderEMEA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Other documents can be also found here.

Part Nr.  
2200T-GO1
2200T-GO1
Schrader programmable EZ-sensor® GO 433 MHz Europe Titanium

Part Nr.: 2200T-GO1
Commercial Name: Schrader programmable EZ-sensor® GO 433 MHz Europe Titanium
Oem Sensor Pn:
Other Number Stamped:
Ean Code: 5054208009438
Nut Torque Nm: 6
Screw Torque Nm:
Valve Core Torque Nm: 0.25
Colour: BLACK White lid
Note:

For more information on product and availability please contact us at Schrader-SalesEU@Sensata.com

 
 

Click on item for more details:

This list is being continuously updated.

Part Nr.: 5076T
Commercial Name: EZ-sensor Delta Service Kit Titanium
Schrader France Reference:
Note:
99.99 € */each
Product currently not available, please contact us to order Product displayed for reference only, service kits might be available Click here to order

Click on item for more details: